Description
Introduction
The 4K60 HDMI/USB-C 2×1 HDBT Wall-plate Transmitter supports one HDMI input and one USB-C input within a standard 86mm×86mm wall box. It can transmit HDMI high-definition signal, bidirectional IR control signal, bidirectional RS-232 control signal and USB 2.0 signal over CAT6 to the distance up to 328ft/100m (HBT mode) or 492ft/150m (LRM mode). Video resolution is up to 4K2K@60Hz (4:4:4).
This product converts HDMI signal to standard HDBaseT signal and transmits it through LAN cable. It can easily control signal source device or display device from the remote end through bi-directional IR signal pass- through function. It also supports POC function with POC control switch.
The Extender can be widely used in other fields such as video conference system, multimedia signal broadcasting, HDMI signal extension, etc.
Features
- HDMI 2.0b, HDCP 2.2/1.x and DP 1.2a compliant
- HDMI input supports 18Gbps video bandwidth USB input supports 5.4Gbps video bandwidth
- Support video resolution up to 4K2K@60Hz (4:4:4)
- Up to 7.1 channels HD audio
- Input signal source selection supports button switching
- Built-in mode DIP switch for selecting the HBT mode or LRM mode
HBT mode: Audio and video signals can be transmitted up to 328ft/100m for 4K60/4K30/1080P
LRM mode: Audio and video signals can be transmitted up to 492ft/150m for 4K30/1080P - Built-in EDID DIP switch supports intelligent EDID management
- Built-in audio DIP switch supports analog audio embedding
- Built-in POC switches, when both POC switches of TX and RX are turned on, the Extender supports bidirectional 24V POC function, that is, either TX or RX is powered by 24V1A power supply, the another does not need power supply from the DC jack. (See the Description 1)
- Transmit bidirectional Infrared control signal together with the HDMI signal. (See the Description 2)
IR IN is a 5V power supply level - Transmit bidirectional RS-232 control signal together with the HDMI signal. (See the Description 3)
- The Receiver supports USB 2.0 signal transmission
- Standard 86mm x 86mm wall box.
Specification
| Technical | |
| HDMI Compliance | HDMI 2.0b |
| HDCP Compliance | HDCP 2.2 |
| Video Bandwidth | HDMI: 18Gbps; USB-C：5.4Gbps |
| HDMI Video Resolution | Up to 4K2K@60Hz 4:4:4 |
| Color Space | RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0 |
| Color Depth | 8/10/12bit |
| HDMI Audio Formats | LPCM 7.1CH, Dolby True HD and DTS-HD Master (Full format) |
| Analog Audio Embedding | 48KHz |
| Transmission
Distance |
LRM mode: 492ft/150m (4K30/1080P)
STD-HBT mode: 328ft/100m (4K60/4K30/1080P) |
| ESD Protection | Human body model—±8kV (Air-gap discharge) &±4kV (Contact discharge) |
| Connections | |
|
Transmitter |
Input: 1 x HDMI IN [Type A, 19-pin female] 1 x USB-C IN [USB Type C]
1 x AUDIO IN [3.5mm Stereo Mini-jack] Output: 1 x HDBaseT OUT [RJ45] Control: 1 x TO PC [USB Type B] 1 x RS-232 [3pin-3.81mm Phoenix connector] 1 x IR IN [3pin-3.81mm Phoenix connector] 1 x IR OUT [2pin-3.81mm Phoenix connector] |
|
Receiver |
Input: 1 x HDBT IN [RJ45]
Output: 1 x HDMI OUT [Type A, 19-pin female] 1 x AUDIO OUT [3pin-3.81mm Phoenix connector] Control: 2 x USB 2.0 [USB Type A] 1 x RS-232 [3pin-3.81mm Phoenix connector] 1 x IR IN [3pin-3.81mm Phoenix connector] 1 x IR OUT [2pin-3.81mm Phoenix connector] 1 x SERVICE [Micro USB] |
| Mechanical | |
| Housing | Metal Enclosure |
| Color | Front panel: White; Rear case: Black |
| Dimensions | Transmitter: 86mm [W] x 86mm [D] x 38.5mm [H] Receiver: 157.2mm [W] x 88mm [D] x 20mm [H] |
| Weight | Transmitter: 234g; Receiver: 377g |
| Power Supply | 24V/1A (supporting bidirectional POC power supply) |
| Power Consumption | 12.48W (Max) |
| Operating Temperature | 32 – 104°F / 0 – 40°C |
| Storage Temperature | -4~140°F / -20~60°C |
| Relative Humidity | 20 – 90% RH (no condensation) |
Operation Controls and Functions
Transmitter Panel
| No. | Name | Function Description |
| 1 | USB-C IN port | USB-C signal input port, supporting video signal (up to 4K60) and USB2.0 signal, connected to USB-C signal source device. |
| 2 | USB-C LED | USB-C signal input indicator. When the USB-C signal is selected as the input source, the green indicator light on. |
| 3 | HDMI IN port | HDMI signal input port, connected to HDMI source device, such as Blu-ray or PS4. |
| 4 | HDMI LED | HDMI signal input indicator. When the HDMI signal is selected as the input source, the green indicator light on. |
| 5 | AUDIO IN port | Analog audio input port for audio embedding. |
| 6 | TO PC port | USB-B port, connected to PC. This port can be switched along with the HDMI IN port, that is, when switching to the HDMI signal source, the USB HOST can be selected simultaneously. |
| 7 | SOURCE button | Used to switch HDMI/USB-C input signal source. |
| 8 | RS-232 port | Connected to PC or control system through 3-pin Phoenix connector for RS-232 serial command pass-through. |
| 9 | IR IN port | Connected to IR wideband receiver cable, receiving the remote control signal and then send it to the receiving end. |
| 10 | IR OUT port | Connected to IR blaster cable, sending the remote control signal from the receiving end. |
| 11 | DC 24V port | DC 24V/1A power input port.
Note that the extender supports POC function, it means that either transmitter or receiver is powered on by 24V/1A power adapter, the other one doesn’t need power supply. |
| 12 | POC switch | Use the switch to turn on/off POC function. |
| 13 | HDBaseT OUT port | HDBaseT signal output port, connected to the HDBT IN port of Receiver with a CAT6 cable. |
| 14 | MODE
DIP switch |
Used to select the working mode:
LRM-long reach mode: Extend the signal up to 492ft/150m through a single CAT6 network cable. STD-HBT mode: Extend the signal up to 328ft/100m through a single CAT6 network cable. |
| 15 | AUDIO IN
DIP switch |
Used to select the signal source for the audio output of Receiver:
HDMI: Output the de-embedded audio from the HDMI IN port of Transmitter. L/R: Output the analog audio embedded from the AUDIO IN port of Transmitter. |
| 16 | EDID
DIP switch |
00- Copy RX display’s EDID (as factory default) 01- 4K30 4:4:4
10- 1080p60 4:4:4 |
Receiver Panel
| No. | Name | Function Description |
| 1 | Power LED | Red LED indicates that the Receiver is powered on. |
| 2 | LINK LED
(Green) |
·Light on: Transmitter and Receiver are in good connection status.
·Light Flashing: Transmitter and Receiver are in poor connection status. ·Light off: Transmitter and Receiver are not connected. |
| 3 | VIDEO LED
(Green) |
Signal indicator
·Light Flashing: There is valid signal input. ·Light off: There is no signal or the signal is invalid. |
| 4 | USB 2.0 port | USB Type A port for connecting USB 2.0 devices, such as USB Flash Drive, Mouse and Keyboard. |
| 5 | SERVICE port | Software update port. Send command “s switch uart 0!” to switch MCU; send command “s switch uart 1!” to switch VALENS. |
| 6 | DC 24V port | DC 24V/1A power input port.
Note that the extender supports POC function, it means that either transmitter or receiver is powered on by 24V/1A power adapter, the other one doesn’t need power supply. |
| 7 | POC switch | Use the switch to turn on/off POC function. |
| 8 | HDBT IN
port |
HDBaseT signal input port, connected to the HDBaseT OUT port of Transmitter with a CAT6 cable. |
| 9 | Link Signal Indicator (Green) | · Light on: Transmitter and Receiver are in good connection status.
· Light Flashing: Transmitter and Receiver are in poor connection status. · Light off: Transmitter and Receiver are not connected. |
| 10 | Data Signal Indicator (Yellow) | · Light Flashing: There is data transmission.
· Light off: There is no data transmission. |
| 11 | HDMI OUT
port |
HDMI signal output port, connected to HDMI display device such as TV or monitor. |
| 12 | AUDIO OUT
port |
Analog audio output port. |
| 13 | RS-232 port | Connected to PC or control system through 3-pin Phoenix connector for RS-232 serial command pass-through. |
| 14 | IR IN port | Connected to IR wideband receiver cable, receiving the remote control signal and then send it to the transmitting end. |
| 15 | IR OUT port | Connected to IR blaster cable, sending the remote control signal from the transmitting end. |
- POC (Power over Cable) Application Example
- Bidirectional Infrared control Application Example
- Bidirectional RS-232 control Application Example
- Application Example
Additional information
| Weight | 0.98 kg |
|---|---|
| Dimensions | 31.00 × 13.50 × 7.50 cm |
| Warranty | 1 Year Warranty |
| WHAT'S IN THE BOX | 1 x 4K60 HDMI/USB-C 2×1 HDBT Wall-plate Transmitter |
Related products
