Description
This HDBaseT single network cable KVM extender transmits HDMI signal up to 70meters over cat6 fluently and clearly. It is lossless in signal and supports 3D, 24bits dee color, CEC, HDCP and ultra HD 4KX2K@30Hz. This KVM Extender is used to increase the distance between a source (computer, CPU) and its console (Keyboard, mouse, and other peripheral devices). It is useful for control and security purposes. Therefore it is widely used in command center, data control center, operation rooms in military, bank, government, enterprise etc.
Features
- Apply HDbaseT extend technology
- Uncompressed HDMI video signal
- Support distance up to 40m when 4Kx2k@30Hz
- Extend 1080p signal over cat6 up to 70 meters
- Support bi-directional IR pass back
- Support HDCP, CEC, 24 deep color
- Support mouse and keyboard extension
- Support uncompressed LPCM audio and compressed DTS-HD, dolby true HD
Specification
| Items | Specification | ||
| Power supply | Voltage/Current | DC12V/1A | |
| Power consumption | 8W | ||
| HDMI performance and interface | HDMI compliance | HDMI 1.4 | |
| HDCP compliance | HDCP 1.4 | ||
| HDMI resolution supported | 480i@60Hz,
480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50@60Hz, 1080p@50@60Hz, 4Kx2K@30Hz |
||
|
HDMI performance and interface |
Supports audio formats | LPCM, DTS-HD,
Dolby True HD |
|
| Maximum transfer rate | 10.2Gbps | ||
| Input and output TMDS signal | 0.7~1.2Vp-p (TMDS) | ||
| Input and output DDC signal | 5Vp-p (TTL) | ||
| Input cable length supported | ≤5m(AWG26 HDMI
1.3cable standard) |
||
| Output cable length supported | ≤5m(AWG26 HDMI
1.3cable standard) |
||
|
Transmission length |
CAT5E | 60m | Up to 1080p@60Hz 36bpp |
| 35m | 1080p@60Hz 48bpp, 1080p@60Hz 3D, 4Kx2K@30Hz | ||
| CAT6 | 70m | Up to 1080p@60Hz 36bpp | |
| 40m | 1080p@60Hz 48bpp, 1080p@60Hz 3D, 4Kx2K@30Hz | ||
| Protection level | Electrostatic protection of the whole machine | 1a contact discharge
level 3 |
|
| 1b Air discharge
level 3 |
|||
| Standard: IEC61000-4-2 | |||
| Protection level | Bi-direction | ||
| Operating
environment |
Working temperature | 0 ~ 50°C | |
| Storage temperature | -10~70°C | ||
| Humidity (no condensation) | 0~90% | ||
|
Body Properties |
Dimension | 99.45(L)x94.50(W)
x25.70(H)mm |
|
| Material | Aluminium alloy material + Iron alloy material | ||
| Processing technology | Sandblasting | ||
| Color | Black | ||
| Weight | Tx: 220g Rx: 230g | ||
| Reliability | Mean time between failures (MTBF) | >30000 Hours | |
Panel Description
1.Transmitter (Tx)
| 1. | DC12V input | Connect with the power supply |
| 2. | Transmission signal indicator | 1. The first LED: It turn on when power on.
2. The second led: It turn on when the transmitter unit and the receiver unit connect well with each other, and it flashes when there is no transmission between the transmitter unit and the receiver unit. 3. The third led: It turn on when the receiver unit connect well with the HDMI display device, and it turn off when no transmission between the receiver unit and the display device. |
| 3. | HDBT Output | HDBaseT signal output |
| 4. | USB connection indicator | Indicates that the signal is connected properly |
| 5. | USB port | Connect with computer/PC |
| 6. | HDMI Input | Connect with HDMI source device |
| 7. | IR receiver extension cable interface | Connect with IR receiver extension cable. Please make sure the remote control is within the required range of IR receiver |
| 8. | IR blaster extension cable interface | Connect with IR blaster extension cable. Please put the IR blaster close to source device to get the best IR signal transmission from receiver |
- Receiver (RX)
| 1. | DC12V input | Connect with the power supply |
| 2. |
Transmission signal indicator |
1. The first LED: It turn on when power on.
2. The second led: It turn on when the transmitter unit and the receiver unit connect well with each other, and it flashes when there is no transmission between the transmitter unit and the receiver unit. 3. The third led: It turn on when the receiver unit connect well with the HDMI display device, and it turn off when no transmission between the receiver unit and the display device. |
| 3. | HDBT Input | HDBaseT signal input |
| 4. | USB connection indicator | Indicates that the signal is connected properly |
| 5. | USB port | Connect with keyboard and mouse |
| 6. | HDMI Output | Connect with HDMI display device |
| 7. | IR receiver extension cable interface | Connect with IR receiver extension cable. Please make sure the remote control is within the required range of IR receiver |
| 8. | IR blaster extension cable interface | Connect with IR blaster extension cable. Please put the IR blaster close to source device to get the best IR signal transmission from receiver |
Connections
Additional information
| Weight | 0.95 kg |
|---|---|
| Dimensions | 24.00 × 17.50 × 8.00 cm |
| WARRANTY | 1 Year Warranty |
| WHAT'S IN THE BOX | 1* HDMI HDBase-T KVM Extender Transmitter |
Related products
