KA195 HDMI EXTENDER HDBASE-T POC 18G 100METER

The 18Gbps HDMI Extender is a tool which can extend your HDMI signal over 328fts/100meters to a compatible display. It is designed to convert HDMI signal to standard HDBaseT signal which can be transmitted by LAN cable. It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source in the Sink side which is 328fts outside, also you can control the Sink in the Source side which is 328fts outside by using the HDMI Extender.

 

Features

1. HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant
2. Video resolutions up to 4K2K@50/60Hz (YUV444)
3. 10bits HDR (High Dynamic Range) pass through
4. Supports HDMI High Bit Rate(HBR) audio pass through
5. Supports CEC bypass
6. POC (Power Over Cable) function is supported, either TX or RX is powered by24V@1A power supply, the another does not need power supply from the DC jack. POC Power consumption is less than 10W.
   ※ See the description 1
7. Transfer Bidirectional Infrared control signal together with the HDMI signal.
   ※ See thedescription 2.
8. Transfer Bidirectional RS232 control signal together with the HDMI signal.
   ※ See the description 3.
9. Transfer Bidirectional Ethernet signal together with the HDMI signal.
   ※ See the description 4.
10. Transmission distance: Over CAT6 cable

                        100 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;

                         70 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit;

                         3D1080P@60Hz@36bit; 4K x 2K@30Hz@24bit, 4K2K@50/60Hz (YUV420), 4K2K@50/60Hz (YUV444)

Specification

Technical
HDMI Compliance	HDMI 2.0b
HDCP Compliance	HDCP 2.2 and HDCP 1.4
Video Bandwidth	18 Gbps
Video Resolutions	up to 4K2K@50/60Hz(YUV4:4:4),4K2K@30Hz, 1080P@120Hz, and 1080P 3D@60Hz
Color Space	RGB, YCbCr 4:4:4, YCbCr 4:2:2
Color Depth	10-bit, 12-bit
HDMI Audio Formats (Pass-through)	LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
ESD Protection	Human body model — ±8kV (air-gap discharge) & ±4kV (contact discharge)
Connections
Inputs	Transmitter :1x HDMI Type A [19-pin female]              1x IR INPUT [3.5mm Stereo Mini-jack]              1x RS232 [Phoenix jack]              1x Service [Mini-USB jack]              1x Ethernet In/Out[RJ45] Receiver: 1x HDBaseT In [RJ45]                   1x Ethernet In/Out[RJ45]                   1x IR INPUT [3.5mm Stereo Mini-jack]                   1x RS232 [Phoenix jack]                   1x Service [Mini-USB jack]
Outputs	Transmitter : 1x HDBaseT Out [RJ45]               1x IR OUTPUT [3.5mm Stereo Mini-jack]             Receiver:   1x HDMI Type A [19-pin female]               1x IR INPUT [3.5mm Stereo Mini-jack]
Mechanical
Housing	Metal Enclosure
Color	Black
Dimensions	157mm [W] x 90mm [D] x 20mm [H]
Weight	333g
Power Supply	Input: AC100 – 240V 50/60Hz Output: DC 24V/1A (US/EU standards, CE/FCC/UL certified)
Power Consumption	24W (Max)
Operation Temperature	32 – 104°F / 0 – 40°C
Storage temperature	-4 – 140°F / -20 – 60°C
Relative Humidity	20   – 90% RH (no condensation)

Operation Controls and Functions

Transmitter

 

1. Power LED: System power indicator.
2. DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply.
3. HD BaseT Out: Standard HD BaseT signal output port. Connect HD BaseT receiver with a UTP cable following the standard of direct interconnection method
4. HDMI In: Connect this to HDMI source devices such as Blu-ray or PS4 player
5. IR In: Channel 2 IR Receiver. Connect with Wideband IR Rx.
6. IR Out: Channel 1 IR Transmitter. Connect with Wideband IR Tx.
7. RS-232: Phoenix jack provide Serial port control signal from receiver or to receiver.
8. Service: Manufacturer use only.
9. Ethernet: This slot provides Internet signal from transmitter or to transmitter.
10. Connection Signal Indicator Lamp
    ※Illuminate: The Transmitter and Receiver are in good connections status.
    ※Flashing: The Transmitter and Receiver are in poor connections status.
    ※Dark: The Transmitter and Receiver are not connected.
11. Data Signal Indicator Lamp
    ※Illuminate: The HDMI signal with HDCP.
    ※Flashing: The HDMI signal without HDCP.
    ※Dark: No HDMI signal.

Receiver

1. Power LED: System power indicator.
2. DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply.
3. HDBaseT In: Standard HD BaseT signal input port. Connect HDBaseT Transmitter with a UTP cable following the standard of direct
   interconnection method
4. HDMI Out: HDMI output port. This slot is where you connect the HDTV or monitor with HDMI cable.
5. IR In: Channel 1 IR Receiver. Connect with Wideband IR Rx
6. IR Out: Channel 2 IR Transmitter. Connect with Wideband IR Tx.
7. RS-232: Phoenix jack provide Serial port control signal from receiver or to receiver.
8. Service: Manufacturer use only.
9. Ethernet: This slot provides Internet signal from transmitter or to transmitter.
10. Connection Signal Indicator Lamp
    ※Illuminate: The Transmitter and Receiver are in good connections status
    ※Flashing: The Transmitter and Receiver are in poor connections status.
    ※Dark: The Transmitter and Receiver are not connected.
11. Data Signal Indicator Lamp
    ※Illuminate: The HDMI signal with HDCP.
    ※Flashing: The HDMI signal without HDCP.
    ※Dark: No HDMI signal.

Description 1
POC (Power Over Cable) Application Example

Description 2
Bidirectional Infrared control Application Example

Description 3
Bidirectional RS232 control Application Example

 

Description 4
Bidirectional Ethernet signal Application Example

Connection Diagram

 

Click here for product PDF

Click here for product Manual

Weight	1.20 kg
Dimensions	24.00 × 18.50 × 7.50 cm
WARRANTY	1 Year Warranty
WHAT'S IN THE BOX	1 x HDMI 18Gbps Transmitter 1 x HDMI 18Gbps Receiver 2 x Wideband IR Tx 2 x Wideband IR Rx 1 x 24V/1A Power Adaptor (3 months warranty) 1 x User Manual